The MEB static bar is a very efficient and versatile static eliminator used in a wide variety of applications. Its’ small size and ability to fit in tight spaces, makes it a favorite of machine builders. The MEB bar is UL approved and is also available with additional studs and right angle cable exit for ease of installation.
Specifications
| Housing |
Stainless steel |
| Inner Bar | 0-30 kV @ 5mA & 0-60 kV @ 2.5mA |
| Emitters | 302 Stainless steel |
| Overall Length | 6” to 141” |
| Mounting Distance | 8.5” to 144” |
| Maximum Speed (FPM) | 1” to 3” from target surface |
| Power Supply | 1200 FPM |
Dimension Drawing
The MEB requires a 7kV power supply for operation, which must be ordered separately (see below).
 |
 |
|||
| D167Q & D257Q (not pictured) Power Supply | F167 & F267 (not pictured) Power Supply | |||
| Input Requirements | D167Q – 120V, 50/60Hz D257Q – 230V, 50/60Hz |
Input Requirements | F167 – 120V, 50/60 Hz F267 – 230V, 50/60 Hz |
|
| Output Voltage | 7 kV, 3mA max | Output Voltage | 7 kV, 3mA max | |
| Number of outputs for static eliminators |
2 | Number of outpurs for static eliminators |
2 | |
| Max length of static bars which can be attached |
200” | Max length of static bars which can be attached |
200” | |
| Does the unit accept shielded cable |
Yes | Does the unit accept shielded cable |
No | |
| Acceptable for hazardous locations | No | |||